Product SKUs

MBD-H8DCL-iF
H8DCL-iF (Standard Retail Pack)

Physical Stats

Form Factor
ATX
Dimensions
12" x 10"

Processor/Chipset

CPU
Dual 1207-pin Socket C32
Supports two 8/6/4-Core ready AMD Opteron™ 4000 Series processors
HT3.0 Link support
Chipset
AMD chipset SR5690 + SP5100

System Memory

Memory Capacity
8 DIMM sockets
Supports up to 256GB Registered ECC or 64GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 8 DIMMs
Dual channel memory bus
For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
See Detailed Memory Support Matrix
Memory Type
Registered ECC or unb. ECC / non-ECC DDR3 1600/1333/1066 MHz SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
1GB, 2GB, 4GB, 8GB, 16GB, 32GB
Memory Voltage
1.35V or 1.5V

On-Board Devices

SATA
AMD SP5100 (RAID 0, 1, 10)
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM over LAN support
Winbond® WPCM450 BMC
Network Controllers
2 Intel® 82574L single-port Gigabit Ethernet Controllers
10/100/1000BASE-T support
VGA
Matrox G200eW 16MB DDR2
Super I/O
Winbond® W83527 chip

Input / Output

SATA
6x SATA (3Gb/s) ports
LAN
2 RJ45 LAN ports
1 RJ45 Dedicated LAN supports IPMI
USB
7x USB 2.0 ports
2 rear, 1 Type-A, 2 headers for 4 ports
VGA
1x VGA port
Serial Ports
2x Fast UART 16550 serial port (one header & one port)
Power
SSI 24-pin + 8-pin + 8-pin power connectors / EPS12V

Note: Two 8-pin connectors are required to support 2 CPUs due to SSI spec
Others
1 SATA DOM power connector, TPM header

Expansion Slots

PCI-E
1 PCI-E 2.0 x8 (in x16 slot)
3 PCI-E 2.0 x8
1 PCI-E 2.0 x4 (in x8 slot)
1 PCI

Chassis (Optimized for H8DCL-iF )

3U/Mid Tower
CSE-835TQ-R920B
CSE-936A-R900B
CSE-936A-R1200B
CSE-732i-500B
Tower/4U Rackmount
CSE-743TQ-865B
CSE-743TQ-865B-SQ
CSE-743TQ-R760
CSE-745TQ-800B
CSE-745TQ-920B
CSE-745TQ-R800B
CSE-842TQ-665B
CSE-846A-R1200B
CSE-846E1-R900B
CSE-846E16-R1200B
CSE-846E2-R900
CSE-846E26-R1200B
Recommendation:
1. Strongly suggest using SuperMicro recommended chassis
2. Active Heatsink SNK-P0048AP4 plus BKT-0048L is recommend used on tower and 4U chassis

System BIOS

BIOS Type
16Mb SPI Flash ROM with AMI® BIOS
BIOS Features
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 2.0
USB Keyboard Support
SMBIOS 2.3

Management

Software
IPMI (Intelligent Platform Management Interface) 2.0
Super Doctor III
Power Configurations
ACPI Power Management
Wake-On-LAN (WOL) header
Keyboard Wakeup from Soft-Off
Power-on mode control for AC power loss recovery

PC Health Monitoring

CPU
Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, VBAT, HT, memory, chipset
CPU switching voltage regulator
FAN
Up to 6-fan status tachometer monitoring
Up to 6x 4-pin fan headers
Status monitor for speed control
4-pin fan support (w/o speed control)
Low noise fan speed control
(4-pin fan only)
Pulse Width Modulated (PWM) fan connectors
Temperature
Monitoring for CPU and chassis environment
CPU Thermal Trip Support
Thermal control for 8x Fan connectors
I2C Temperature Sensing Logic
LED
CPU / System Overheat LED
+5V Standby Alert LED
Other Features
Chassis Intrusion Detection
Chassis Intrusion Header

Operating Environment / Compliance

RoHS

RoHS 6/6
RoHS Compliant 6/6, Pb Free
Environmental Specifications
Operating Temperature:
10°C to 35°C (50°F to 95°F)
Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity:
8% to 90% (non-condensing)
Non-operating Relative Humidity:
5% to 95% (non-condensing)

OS Compatibility

• Please see our OS Compatibility Chart

Regulatory

FCC
Passed to meet FCC standard requirement

További specifikáció