Product SKUs
MBD-H8DIi+-O
H8DIi+ (Standard Retail Pack)
MBD-H8DIi+-B
H8DIi+ (Bulk Pack)
Physical Stats
Form Factor
Extended ATX
Dimensions
12" x 13.05" (30.5cm x 33.2cm)
Processor/Chipset
CPU
Dual 1207-pin Socket F
Supports up to two Six-Core / Quad-Core AMD Opteron™ 2000 Series processors**
HT3.0 Link support
Chipset
AMD chipset SR5690 + SP5100
System Memory
Memory Capacity
Sixteen 240-pin DIMM sockets
Support up to 128GB DDR2 800/667/533 MHz memory *
Dual channel memory bus
Single or Dual (recommended) channel memory support
For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
Memory Type
DDR2 800/667/533 MHz Registered ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
256 MB, 512 MB, 1GB, 2GB, 4GB
Memory Voltage
1.8V only
On-Board Devices
SATA
AMD SP5100 (RAID 0, 1, 10)
Network Controllers
Two Intel® 82574L controller, Dual-Port
Gigabit Ethernet
10/100/1000BASE-T support
VGA
Matrox G200 16MB DDR2
16MB Graphics & VGA port
Super I/O
Winbond® 83627DHG chip
Input / Output
SATA
6x SATA2.0 (3Gb/s) Ports
IDE
Single EIDE channel support up to two UDMA IDE devices
Supports UDMA Mode 5
Supports PIO Mode 4
Supports ATA 100/133
Floppy
1 Floppy port, 1.44 MB
LAN
2 RJ45 LAN ports
USB
6x USB 2.0 ports
2x Rear / 2x header / 2x type A
VGA
1x VGA port
Keyboard / Mouse
PS/2 keyboard and mouse ports
Serial Ports
1x Fast UART 16550 serial port
1x serial port header
Others
1 SATA DOM power connector
Expansion Slots
PCI-Express
2x PCI-e 2.0 x16 (x8 signals) slots
1x PCI-e 2.0 x8 slot
1x PCI-e 2.0 x8 (x4 signals) slot
PCI-X
2x PCI-X 64-bit 133/100MHz slots
System BIOS
BIOS Type
16Mb SPI Flash ROM with AMI® BIOS
BIOS Features
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 2.0
USB Keyboard Support
SMBIOS 2.3
Management
Software
Super Doctor III
Watch Dog
Power Configurations
ACPI Power Management
Wake-On-LAN (WOL) header
Keyboard Wakeup from Soft-Off
Power-on mode control for AC power loss recovery
PC Health Monitoring
CPU
Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, VBAT, HT, memory, chipset
CPU switching voltage regulator
FAN
Up to 8-fan status tachometer monitoring
Up to eight 4-pin fan headers
Status monitor for speed control
3-pin fan support (w/o speed control)
Low noise fan speed control
(4-pin fan only)
Pulse Width Modulated (PWM) fan connectors
Temperature
Monitoring for CPU and chassis environment
CPU Thermal Trip Support
I2C Temperature Sensing Logic
LED
CPU / System Overheat LED
+5V Standby Alert LED
Other Features
Chassis Intrusion Detection
Chassis Intrusion Header
Operating Environment / Compliance
RoHS
RoHS 5/6
RoHS Compliant 5/6, Server Exemption
Environmental Specifications
Operating Temperature:
10°C to 35°C (50°F to 95°F)
Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity:
8% to 90% (non-condensing)
Non-operating Relative Humidity:
5% to 95% (non-condensing)
OS Compatibility
• Please see our OS Compatibility Chart
Regulatory
FCC
Passed to meet FCC standard requirement
Fényképek:
A szállítási és egyéb költség nem része a hitelösszegnek!
Tisztelt Vásárlónk!
Tartós adathordozó vásárlása során ügyfeleink automatikusan megkapják a termékhez tartozó Adattörlő kódot, melyet a számlán tüntetünk fel.
Fizetésnél kérje az ingyenes adattörlő kódot adatainak biztonsága érdekében!
A Kormány döntése alapján a kereskedő minden tartós adathordozó termék vásárlásakor köteles ingyenes adattörlő kódot biztosítani.
További információk a Nemzeti Média- és Hírközlési Hatóság honlapján: