Product SKUs
MBD-H8QI6+-F-O
H8QI6+-F (Standard Retail Pack)
MBD-H8QI6+-F-B
H8QI6+-F (Bulk Pack)
Physical Stats
Form Factor
Proprietary
Dimensions
16.4" x 13" (41.7cm x 33.0cm)
Processor/Chipset
CPU
Quad 1207-pin Socket F
Supports up to four Six-Core / Quad-Core AMD Opteron™ 8000 Series processors**
HT3.0 Link support
Chipset
AMD SR5690 + SP5100 Chipset
System Memory
Memory Capacity
Sixteen 240-pin DIMM sockets
Support up to 128GB memory
Dual channel memory bus; Single or Dual (recommended) channel memory support
For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
Memory Type
DDR2 800/667/533 MHz Registered ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
256 MB, 512 MB, 1GB, 2GB, 4GB, 8GB
Memory Voltage
1.8V only
On-Board Devices
SATA
AMD SP5100 (RAID 0, 1, 10)
SAS
LSI 2008 8 port SAS2 controller
RAID 0, 1, 10; RAID 5 Optional
Optional: AOC-SAS2-RAID5-KEY
RAID 5 support
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM over LAN support
Winbond® WPCM450 BMC
Network Controllers
Intel® 82576 controller, Dual-Port
Gigabit Ethernet
10/100/1000BASE-T support
VGA
Matrox G200eW 16MB DDR2 graphics
Super I/O
Winbond® 83627DHG chip
Input / Output
SATA
6x SATA2.0 (3Gb/s) Ports
SAS
Integrated LSI 2008 SAS2 Controller
Eight Serial Attached SCSI (SAS) ports
8x 6Gbps SAS / SATA ports
IDE
Single EIDE channel support up to two UDMA IDE devices
Supports UDMA Mode 5
Supports PIO Mode 4
Supports ATA 100/133
LAN
2 RJ45 LAN ports
1 RJ45 Dedicated LAN supports IPMI
USB
6x USB 2.0 ports
2x Rear / 2x header / 2x type A
VGA
1x VGA port
Keyboard / Mouse
PS/2 keyboard and mouse ports
Serial Ports
1x Fast UART 16550 serial port
1x serial port header
Others
1 SATA DOM power connector
Expansion Slots
PCI-Express
1x PCI-e 2.0 x16
Chassis ( Optimized for H8QI6+-F )
2U Chassis
CSE-828TQ+-R1400LPB
Tower / 4U Rackmount
CSE-748TQ-R1400B
CSE-748TQ-R1K43B
System BIOS
BIOS Type
16Mb SPI Flash ROM with AMI® BIOS
BIOS Features
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 2.0
USB Keyboard Support
SMBIOS 2.3
Management
Software
IPMI (Intelligent Platform Management Interface) 2.0
Super Doctor III
Power Configurations
ACPI Power Management
Wake-On-LAN (WOL) header
Keyboard Wakeup from Soft-Off
Power-on mode control for AC power loss recovery
PC Health Monitoring
CPU
Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, VBAT, HT, memory, chipset
CPU switching voltage regulator
FAN
Up to 9-fan status tachometer monitoring
Up to nine 4-pin fan headers
Status monitor for speed control
3-pin fan support (w/o speed control)
Low noise fan speed control
(4-pin fan only)
Pulse Width Modulated (PWM) fan connectors
Temperature
Monitoring for CPU and chassis environment
CPU Thermal Trip Support
Thermal control for 9x fan connectors
I2C Temperature Sensing Logic
LED
CPU / System Overheat LED
+5V Standby Alert LED
Other Features
Chassis Intrusion Detection
Chassis Intrusion Header
Operating Environment / Compliance
RoHS
RoHS 5/6
RoHS Compliant 5/6, Server Exemption
Environmental Specifications
Operating Temperature:
10°C to 35°C (50°F to 95°F)
Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity:
8% to 90% (non-condensing)
Non-operating Relative Humidity:
5% to 95% (non-condensing)
OS Compatibility
• Please see our OS Compatibility Chart
Regulatory
FCC
Passed to meet FCC standard requirement
Fényképek:
A szállítási és egyéb költség nem része a hitelösszegnek!
Tisztelt Vásárlónk!
Tartós adathordozó vásárlása során ügyfeleink automatikusan megkapják a termékhez tartozó Adattörlő kódot, melyet a számlán tüntetünk fel.
Fizetésnél kérje az ingyenes adattörlő kódot adatainak biztonsága érdekében!
A Kormány döntése alapján a kereskedő minden tartós adathordozó termék vásárlásakor köteles ingyenes adattörlő kódot biztosítani.
További információk a Nemzeti Média- és Hírközlési Hatóság honlapján: