Product SKUs

MBD-PDSBM-LN2+-O
PDSBM-LN2+ (Standard Retail Pack)
MBD-PDSBM-LN2+-B
PDSBM-LN2+ (Bulk Pack)

Physical Stats

Form Factor
uATX
Dimensions
9.6" x 9.6 ", (24.4cm x 24.4cm)

Processor/Cache

CPU
Single LGA775 ZIF Socket
Supports a Dual-Core Intel® Xeon® 3000 Series
Supports an Intel® Core™2 Duo E6000 and E4000 Series
Supports an Intel® Pentium® E2000 Series
Supports an Intel® Pentium® D 945, 935, 925, 915 and 820, 805
Supports an Intel® Pentium® 4 600 and 500 Series
Supports an Intel® Celeron® E1000 Series
Supports an Intel® Celeron® 400 Series
Supports an Intel® Celeron® D 300 Series
NOTE: This board DOES NOT support Q9000, E8000, E7000, E5000 series or 45nm processor
System Bus
1066 / 800 / 667 MHz system bus

System Memory

Memory Capacity
Two 240-pin DIMM sockets
Supports up to 4 GB of unbuffered, non-ECC DDR2 667/533MHz memory (Single / Dual Channel)
Memory Type
DDR2 667/533MHz unbuffered, non-ECC SDRAM, 240-pin gold-plated DIMMs
DIMM Sizes
256 MB, 512 MB, 1 GB, 2 GB
Memory Voltage
1.8V only

On-Board Devices

Chipset
Intel 946GZ
ICH7R + Intel® 82573
Serial ATA
Intel® ICH7R SATA2 (3 Gbps) controller built-in
Intel:
RAID 0, 1, 5, 10 support (Windows Only)
Network Controllers
2 x Intel® 82573 Gigabit PCI-Express Ethernet
Supports 10BASE-T, 100/1000BASE-TX, RJ45 output
Graphics
On Chip Intel 946GZ video
Super I/O
Winbond 83627DHG chip
Clock Generator
ICS9LPRS511

Input / Output

Serial ATA
Four Serial ATA ports ( 3Gbps )
Four SATA hard drives supported
IDE
One EIDE channel supports up to two UDMA IDE devices
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Floppy
1 Floppy controller; 1.44 MB
LAN
2x RJ45 LAN port
USB
4x USB 2.0 / 1.1 compatible
2 in front (FUCI), 2 in rear
VGA
Intel 946GZ on chip
Keyboard / Mouse
PS/2 keyboard and mouse ports
Serial Ports
1x Fast UART 16550 serial port
1x Serial Header

Chassis ( Optimized for PDSBM-LN2+ )

1U
CSE-811T-300
CSE-513F-260 (Mini 1U)
CSE-512F-260 (Mini 1U)
CSE-813MFT-300C (OEM and SuperServer only)
CSE-502-200B
CSE-503-200B
CSE-510-200B
1U
(For Low-Voltage CPU only)
CSE-811T-260
(Mini 1U)
CSE-512L-260 (Mini 1U)
CSE-513L-260 (Mini 1U)
Important Note
Only Supermicro 1U chassis is recommended for 1U Building Block Solutions

Expansion Slots

Universal Slot
1 (x4) (x8 physical) PCI-Express Slot OR
1x 32-bit 33MHz PCI Slot
PCI
1x 32-bit 33MHz PCI (5V) slots

System BIOS

BIOS Type
8Mb Flash EEPROM with PhoenixBIOS®
BIOS Features
Plug and Play (PnP)
APM 1.2
DMI 2.3
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
Hardware BIOS Virus protection
SMBIOS 2.3

Management

Software
SuperDoctor® III
Watch Dog
NMI
Power Configurations
ACPI/APM Power Management
Main Switch Override Mechanism
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Suspend to RAM (STR)
Power-on mode control for AC power recovery
Internal / External modem remote ring-on

PC Health Monitoring

Voltage
Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V/+5V Standby, VBAT, HT, Memory, Chipset
CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
FAN
Total of five 4-pin fan headers
5 x fans with tachometer monitoring
Status monitor for speed control
Status monitor for on / off control
Support 3-pin PWM fans (with speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan conn.
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 8x Fan Connectors
I2C temperature sensing logic
Thermal Monitor 2 (TM2) Support
PECI
LED
CPU / System Overheat LED
Suspend-state indicator LED
+5V standby alert LED
Other Features
Chassis intrusion Detection
Chassis intrusion Header
SDDC Support

Operating Environment

Environmental Spec.
Operating Temperature: 10°to 35°C (50°to 95°F)
Non-operating Temperature: -40°to 70°C (-40°to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)

Regulatory

FCC
Passed to meet FCC standard requirement

További specifikáció