Product SKUs
MBD-PDSMA+-O
PDSMA+ (Standard Retail Pack)
MBD-PDSMA+-B
PDSMA+ (Bulk Pack)
Physical Stats
Form Factor
ATX
Dimensions
12.0" width x 9.6 " length , (30.5cm x 24.4cm), 6 layers
Processor/Cache
CPU
Single LGA775 ZIF Socket
Supports a Quad-Core Intel® Xeon® 3200 series processor
Supports a Dual-Core Intel® Xeon® 3000 series processor
Supports a Quad-Core Intel® Core™2 Extreme series processor
Supports an Intel® Core™2 Quad series processor
Supports an Intel® Core™2 Duo series processor
Supports an Intel® Pentium® processor E2000 series
Supports a Dual-Core Intel® Pentium® D processor
Supports an Intel® Pentium® Extreme Edition processor
Supports an Intel® Pentium® 4 processor
Supports an Intel® Celeron® processor E1000 series
Supports an Intel® Celeron® processor 400 series
NOTE: This board DOES NOT support Q9000, E8000, E7000, E5000 series or 45nm processor
System Bus
1066 / 800 / 533 MHz system bus
System Memory
Memory Capacity
Four 240-pin DIMM sockets
Supports up to 8 GB of unbuffered, ECC/Non-ECC DDR2 667/533 MHz memory (Dual Channel)
Memory Type
DDR2 667/533MHz unbuffered, ECC SDRAM, 240-pin gold-plated DIMMs
DIMM Sizes
256 MB, 512 MB, 1 GB, 2GB
Memory Voltage
1.8V only
On-Board Devices
Chipset
Intel 3000 chipset
ICH7R SB + PXH-V
Serial ATA
Intel® ICH7R SATA2 (3 Gbps) controller built-in
Intel:
RAID 0, 1, 5, 10 support (Windows Only)
Adaptec:
RAID 0 (Two, three, four drives only)
RAID 1 (Two hard drives only)
IPMI
1U support for Intelligent Platform Management Interface v.2.0 (Optional: AOC-IMPI20-E)
Network Controllers
1x Intel® 82573V Gigabit PCI-Express Ethernet
1x Intel® 82573L Gigabit PCI-Express Ethernet
Supports 10Base-T, 100Base-TX, 1000BASE-TX, RJ45 output
VGA
On-board XGI Z7 graphics, 16MB
Super I/O
Winbond 83627HG chip
Clock Generator
CK410
Input / Output
Serial ATA
Four Serial ATA ports (3.0 Gbps performance)
Four SATA hard drives supported
IDE
One EIDE channel supports up to two UDMA IDE devices
IDE Master / Slave
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Floppy
1 Floppy controller; 1.44 MB
LAN
2x RJ45 LAN ports
USB
6x USB 2.0 compliant / 1.1 compatible
2x internal USB headers for 4 ports
2x USB Rear Ports
VGA
1x VGA Port
Keyboard / Mouse
PS/2 keyboard and mouse ports
Serial Ports
1x Fast UART 16550 serial port
1x Header
Parallel Port
1x Parallel Port Header
Chassis ( Optimized for PDSMA+ )
3U / Mid-Tower
CSE-733T-645
4U / Tower
CSE-742i-420
Expansion Slots
PCI
5x 32-bit 33MHz PCI (5V) slots
PCI-X
1x 64-bit PCI-X 133MHz Slot
PCI-Express
1 (x8) PCI-Express Slot
System BIOS
BIOS Type
8Mb Flash EEPROM with Phoenix BIOS®
BIOS Features
Plug and Play (PnP)
DMI 2.3 support
PCI 2.2
ACPI 1.0 (limited)
USB Keyboard support
SMBIOS 2.3
PECI
Management
Software
Optional IPMI (Intelligent Platform Management Interface) 2.0
SuperDoctor® III
Watch Dog
W83793 Hardware Monitor
Power Configurations
ACPI Power Management
Main Switch Override Mechanism
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Power-on mode control for AC power loss recovery
Internal/External modem remote ring-on
PC Health Monitoring
Voltage
Monitors for CPU Cores,Memory +1.8V, Chipset +1.5V, VIT FSB, +3.3V, +5V, ±12V, 3.3V Standby, +5V Standby, VBAT
CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
FAN
Total of six 4-pin fan headers
6 fans with tachometer monitoring
Status monitor for on/off control
Status monitor for speed control
Low noise fan speed control
Support 3-pin fans (without speed control)
Pulse Width Modulated (PWM) fan connector
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Monitor (TM2) Support
PECI
LED
CPU / System Overheat LED
Standby Voltage Alert LED
Other Features
Chassis Intrusion Detection
Chassis Intrusion Header
Operating Environment
Environmental Spec.
Operating Temperature: 10°to 35°C (50°to 95°F)
Non-operating Temperature: -40°to 70°C (-40°to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)
OS Compatibility
• Please see our OS Compatibility Chart
Regulatory
FCC
Passed to meet FCC standard requirement
Fényképek:
A szállítási és egyéb költség nem része a hitelösszegnek!
Tisztelt Vásárlónk!
Tartós adathordozó vásárlása során ügyfeleink automatikusan megkapják a termékhez tartozó Adattörlő kódot, melyet a számlán tüntetünk fel.
Fizetésnél kérje az ingyenes adattörlő kódot adatainak biztonsága érdekében!
A Kormány döntése alapján a kereskedő minden tartós adathordozó termék vásárlásakor köteles ingyenes adattörlő kódot biztosítani.
További információk a Nemzeti Média- és Hírközlési Hatóság honlapján: