Product SKUs
Motherboard
X10SDV-7TP4F (Bulk Pack)
Physical Stats
Form Factor
Flex ATX
Dimensions
9.0" x 7.25", (22.86cm x 18.42cm)
Processor/Cache
CPU
Intel® Xeon® processor D-1537,
1.7GHz-2.3GHz; CPU TDP support 35W
FCBGA 1667
Cores / Cache
8 Cores, 16 Threads / 12MB
System Memory
Memory Capacity
4x DDR4 DIMM sockets
Supports up to 128GB DDR4 ECC RDIMM
Supports up to 64GB DDR4 ECC/non-ECC UDIMM
Memory Type
2133/1866/1600MHz ECC DDR4 ECC RDIMM and ECC/Non-ECC UDIMM
DIMM Sizes
32GB, 16GB, 8GB, 4GB
Memory Voltage
1.2 V
Error Detection
Corrects single-bit errors
Detects double-bit errors
(using ECC memory)
On-Board Devices
Chipset
System on Chip
SATA/SAS
SoC controller for 4 SATA3 (6Gbps) ports; RAID 0,1,5,10 RSTe
LSI 2116 SW controller for 16 SATA3 (6Gbps) ports; SAS2 and SATA3
Network Controllers
Dual 10G SFP+ from D-1500 SoC
Dual 1GbE with Intel I210
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Video
Aspeed AST2400
TPM
TPM 2.0 header
Input / Output
SATA/SAS
4 SATA3 (6Gbps) ports
16 SAS2/SATA3 ports
LAN
2 10G SFP+ LAN ports
2 1GbE LAN ports
1 Dedicated IPMI LAN port
USB
2 USB 3.0 ports (rear)
5 USB 2.0 ports
(4 via headers, 1 Type A)
Video
1 VGA port
Serial Port / Header
1 COM port (header)
DOM
2 SuperDOM (Disk on Module) power connectors
Chassis (Optimized for X10SDV-7TP4F )
1U Chassis:
SC504-203B
SC505-203B
SC514-505
SC515-R407
SC813MTQ-350CB
Important Chassis Notes
To support the new generation Intel® Xeon® processor-based motherboards, Revision N chassis is recommended. Please talk to your sales representative for details.
SuperServer(s) with X10SDV-7TP4F
Model(s)
SSG-5018D8-AR12L
Expansion Slots
PCI-Express
2 PCI-E 3.0 x8 slots
M.2
Interface: PCI-E 3.0 x4
Form Factor: M Key 2242/2280/22110
Support SATA devices
Mini PCI-E
Interface: PCI-E 2.0 x1
Support mSATA
System BIOS
BIOS Type
128Mb SPI Flash with AMI BIOS
BIOS Features
PCI 3.0
ACPI 5.0
USB Keyboard support
Hardware BIOS Virus protection
SMBIOS 2.8
UEFI 2.4
RTC (Real Time Clock) Wakeup
Management
Software
Intel® Node Manager
IPMI 2.0
KVM with dedicated LAN
NMI
SUM
SuperDoctor® 5
Watch Dog
Power Configurations
ACPI Power Management
ATX Power connector
+12V DC Power Input
Control of power-on for recovery from AC power loss
CPU thermal trip support for processor protection
M.2 NGFF connector, Node Manager Support, SDDC, System level control, UID, WOL
PC Health Monitoring
Voltage
Monitors for CPU Cores, +1.8V, +12V, +3.3V, +5V, Chassis intrusion header, System level control, VBAT
FAN
Total of six 4-pin fan headers supporting tachometer status monitoring
Dual Cooling Zone
Status monitor for speed control
Status monitor for on/off control
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Monitor 2 (TM2) support
PECI
LED
CPU / System Overheat LED
Other Features
Chassis intrusion detection
Chassis intrusion header
12V DC or ATX Power Source
RoHS
Operating Environment
Operating Temperature Range
0°C - 60°C (32°F - 140°F)
Fényképek:
A szállítási és egyéb költség nem része a hitelösszegnek!
Tisztelt Vásárlónk!
Tartós adathordozó vásárlása során ügyfeleink automatikusan megkapják a termékhez tartozó Adattörlő kódot, melyet a számlán tüntetünk fel.
Fizetésnél kérje az ingyenes adattörlő kódot adatainak biztonsága érdekében!
A Kormány döntése alapján a kereskedő minden tartós adathordozó termék vásárlásakor köteles ingyenes adattörlő kódot biztosítani.
További információk a Nemzeti Média- és Hírközlési Hatóság honlapján: