Product SKUs
MBD-X10SLL-S
X10SLL-S (Bulk Pack)
Physical Stats
Form Factor
microATX
Dimensions
9.6" x 9.6", (24.4cm x 24.4 cm)
Processor/Cache
CPU
Intel® Xeon® processor E3-1200 v3/v4 and 4th Gen Core i3, Pentium, Celeron processors
Single Socket H3 (LGA 1150)
System Memory
Memory Capacity
2x 240-pin DDR3 DIMM sockets
Supports up to 16 GB DDR3 ECC Un-Buffered memory (UDIMM)
Memory Type
1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
8GB, 4GB, 2GB, 1GB
Memory Voltage
1.5V, 1.35V
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset
Intel® C222 Express PCH
SATA
SATA3 (6Gbps) w/ RAID 0, 1
SATA2 (3Gbps) w/ RAID 0, 1, 5, 10
Network Controllers
Intel® i217LM + Intel® i210AT Controllers
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
VGA
BMC integrated Aspeed AST1200
Input / Output
Serial ATA
2x SATA3 (6Gbps) ports
2x SATA2 (3Gbps) ports
LAN
2x Gigabit Ethernet LAN ports
USB
4x USB 2.0 ports (2 rear, 2 via header)
VGA
1x VGA D-Sub Connector
DOM
SATA DOM (Disk on Module) power connector support
TPM
1x TPM Header
Chassis (Optimized for X10SLL-S )
2U Chassis:
SC213LT-600LPB
SC823TQ-653LPB
SC213LT-563LPB
3U Chassis:
SC833T-653B
Mid/Mini Tower Chassis:
SC733TQ-665B
SC733TQ-500B
SC731i-300B
SC732i-500B
SC732i-865B
SC732D2-903B
SC732D2-865B
SC732D2-500B
SC732D4-903B
SC732D4-865B
SC732D4-500B
4U / Tower Chassis:
SC745TQ-920B
SC745TQ-R920B
SC842i-500B
SC842TQ-665B
SC842TQ-865B
Important Chassis Notes
To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.
Expansion Slots
PCI-Express
1x PCI-E 3.0 x8 (in x16) slot
1x PCI-E 3.0 x8 slot
System BIOS
BIOS Type
128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
DMI (SMBIOS) 2.7
ACPI 5.0
USB Keyboard support
Management
Software
SuperDoctor® III
Watch Dog
NMI
Power Configurations
ACPI / ACPM Power Management
Main Switch Override Mechanism
Power-on mode for AC power recovery
Internal/External modem ring-on
PC Health Monitoring
Voltage
Monitors for CPU Cores, +1.8V, +12V, +3.3V, +5V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN
Total of three 4-pin fan headers supporting up to 3 fans
3x fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Support 3-pin fans (w/o speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
FC temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
LED
CPU / System Overheat LED
+5V Standby alert LED
Other Features
Chassis intrusion detection
Chassis intrusion header
Operating Environment
Operating Temperature Range
0°C ~ 50°C (32°F ~ 122°F)
Non-Operating Temperature Range
-40°C ~ 70°C (-40°F ~ 158°F)
Operating Relative Humidity Range
8% ~ 90% (non-condensing)
Non-Operating Relative Humidity Range
5% ~ 95% (non-condensing)
Fényképek:
A szállítási és egyéb költség nem része a hitelösszegnek!
Tisztelt Vásárlónk!
Tartós adathordozó vásárlása során ügyfeleink automatikusan megkapják a termékhez tartozó Adattörlő kódot, melyet a számlán tüntetünk fel.
Fizetésnél kérje az ingyenes adattörlő kódot adatainak biztonsága érdekében!
A Kormány döntése alapján a kereskedő minden tartós adathordozó termék vásárlásakor köteles ingyenes adattörlő kódot biztosítani.
További információk a Nemzeti Média- és Hírközlési Hatóság honlapján: