Product SKUs

MBD-X8SIL -O
X8SIL (Standard Retail Pack)
MBD-X8SIL -B
X8SIL (Bulk Pack)

Physical Stats

Form Factor
microATX
Dimensions
9.6" x 9.6" (24.4cm x 24.4cm)

Processor/Cache

CPU
LGA 1156 Socket
Intel® Xeon® X3400 series
Intel® Xeon® L3400 series
Intel® Core™ i3
Intel® Pentium® G6950
Intel® Celeron® G1101

System Memory

Memory Capacity
4x 240-pin DDR3 DIMM slots
Supports up to 32 GB DDR3 ECC Registered memory (RDIMM)
Supports up to 16 GB DDR3 ECC Un-Buffered memory (UDIMM)
1333 / 1066 / 800 MHz
Dual Core processors of Ci3 and Pentium: support ECC UDIMM only
Note: Supports 1-Gb and 2-Gb x8 devices only - Intel 3420 / 3400 Chipset Memory Requirements
Note
All X3400 series and L3426 CPU support RDIMM and UDIMM
All i3 series, L3406, G6950, and G1101 CPU support UDIMM only
Memory Type
1333 / 1066 / 800 MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
1GB, 2GB, 4GB, 8GB
Memory Voltage
1.5 V
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)

On-Board Devices

Chipset
Intel® 3400 chipset
SATA
4x SATA (3 Gbps)
Network Controllers
2x Intel® 82574L Gigabit Ethernet Controllers
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
VGA
Matrox G200eW 16MB DDR2
Super I/O
Winbond 83627DHG-P
Clock Generator
CK505

Input / Output

Serial ATA
4 SATA ports
4 SATA hard drives supported
LAN
2x RJ45 LAN ports
USB
2x USB rear ports
1x USB on-board
1x USB internal header (2 ports)
Total 5 USB 2.0 Compliant
VGA
1x VGA port
Keyboard / Mouse
PS/2 keyboard and mouse ports
Serial Port / Header
1x Fast UART 16550 serial port
1x internal header

Operating Environment
Environmental Spec.
Operating Temperature: 10°to 35°C (50°to 95°F)
Non-operating Temperature: -40°to 70°C (-40°to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)

I/O Panel

• Please see this board's I/O Panel

OS Compatibility

• Please see our OS Compatibility Chart

Chassis ( Optimized for X8SIL )

1U Chassis
CSE-111T-560CB
CSE-510-200B
CSE-510L-200B
CSE-510T-200B
CSE-512-200B
CSE-512F-280B
CSE-512F-520B
CSE-811i-280
CSE-811i-520
CSE-811T-410
CSE-811T-420
CSE-811TQ-280
CSE-811TQ-520B
CSE-813MTQ-280C
CSE-813MTQ-520C
2U Chassis
CSE-213A-R900LPB
CSE-216A-R900LPB
CSE-216E1-R900LPB
CSE-216E2-R900LPB
CSE-822T-400LPB
CSE-823MTQ-R700LPB
CSE-823TQ-650LPB
CSE-825MTQ-R700LPB
CSE-825TQ-560LPB
CSE-825TQ-R700LPB
CSE-826A-R1200LPB
CSE-826E1-R800LPB
CSE-826E2-R800LP
CSE-826TQ-R800LPB
3U Chassis
CSE-833T-550B
CSE-833T-650B
CSE-833T-R760B
CSE-835TQ-R800B
CSE-836A-R1200B
CSE-836E1-R800B
CSE-836E2-R800B
CSE-836TQ-R800B
CSE-933E1-R760B
CSE-933E2-R760B
CSE-933T-R760B
CSE-936A-R1200B
CSE-936A-R900B
CSE-936E1-R900
Mid-Tower
CSE-731D-300B
CSE-731i-300B
CSE-733TQ-465B
CSE-733TQ-645
CSE-733TQ-665B
Tower / 4U Rackmount
CSE-743T-645
CSE-743T-650
CSE-743T-665B
CSE-743T-R760
CSE-743TQ-865B
CSE-743TQ-865B-SQ
CSE-743TQ-R760
CSE-745TQ-800B
CSE-745TQ-R800B
CSE-846A-R1200B
CSE-846E1-R900B
CSE-846E2-R900
CSE-846TQ-R900B
Important Chassis Notes
To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details.

Expansion Slots

PCI-Express
2 (x8) PCI-E 2.0 slot
1 (x4) PCI-E (using x8 slot)
PCI
1 32-bit PCI slot

System BIOS

BIOS Type
32Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
DMI 2.3
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3

Management

Software
SuperDoctor® III
Watch Dog
Power Configurations
ACPI / ACPM Power Management
Main Switch Override Mechanism
Wake-On-LAN (WOL) header
Keyboard Wakeup from Soft-Off
Power-on mode for AC power recovery
Internal/External modem ring-on

PC Health Monitoring

Voltage
Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN
Total of 5 fan headers supporting up to 5 fans
Five 4-pin fan headers
5x fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Support 3-pin fans (w/o speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
FC temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
LED
CPU / System Overheat LED
+5V Standby alert LED
Other Features
Chassis intrusion detection
Chassis intrusion header

OS Compatibility

• Please see our OS Compatibility Chart

További specifikáció