Product SKUs

MBD-X9DRW-CTF31 -O
X9DRW-CTF31 (Standard Retail Pack)
MBD-X9DRW-CTF31 -B
X9DRW-CTF31 (Bulk Pack)

Physical Stats

Form Factor
Proprietary WIO
Dimensions
12.3" x 13" (31.2cm x 33.0cm)

Processor/Cache

CPU
Dual Socket R (LGA 2011)
Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
(up to 135W TDP **)
Note † BIOS version 3.0 or above is required
Note ** Motherboard supports this maximum TDP. Please verify your system can thermally support.
Cache
Up to 30MB
System Bus
QPI up to 8 GT/s

System Memory

Memory Capacity
16x 240-pin DDR3 DIMM slots
Up to 1TB DDR3 ECC LRDIMM
Up to 512GB DDR3 ECC RDIMM
Up to 128GB DDR3 ECC/non-ECC UDIMM
Memory Type
1866/1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
Support ECC and non-ECC UDIMMs

* Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed.
DIMM Sizes
32GB, 16GB, 8GB, 4GB, 2GB, 1GB,
64GB LRDIMM
Memory Voltage
1.5 V, 1.35 V
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)

On-Board Devices

Chipset
Intel® C602J chipset
SATA
SATA3 (6Gbps) with RAID 0, 1, 5, 10
SATA2 (3Gbps) with RAID 0, 1, 5, 10
SAS
SAS3 support via AOM w/ LSI 3108
HW RAID 0, 1, 5, 6, 10, 50, 60 support
Supports up to 16 devices as default, more HDD devices support is also available as an option *

* For special sku, please contact your Supermicro Sales.
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC
Network Controllers
Intel® X540 Dual Port 10GBase-T
Virtual Machine Device Queues reduce I/O overhead
Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8211E PHY (dedicated IPMI)
Video
G200 (Nuvoton WPCM450 BMC)

Input / Output

SATA
2x SATA3 (6Gbps) ports
2x SATA2 (3Gbps) ports
SAS
8x SAS3 (12Gbps) ports
LAN
2x RJ45 10GBase-T ports
1x RJ45 Dedicated IPMI LAN port
USB
4x USB 2.0 ports total (4 rear)
Video
1x VGA port
Serial Port / Header
1x Fast UART 16550 port / 1 header
DOM
1x DOM (Disk on Module) power connector
TPM
1x TPM Header

Chassis (Optimized for X9DRW-CTF31 )

1U Chassis
CSE-116AC-R700WB
2U Chassis
CSE-216BE1C-R920WB
CSE-216BE2C-R920WB
Important Chassis Notes
To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.

SuperServer(s) with X9DRW-CTF31

Model(s)
SYS-1027R-WC1NRT
SYS-1027R-WC1RT

Expansion Slots

PCI-Express
1 (x32) PCI-E 3.0 (left riser slot)
1 (x16) PCI-E 3.0 (right riser slot)
1 (x16) PCI-E 3.0 (HBA Mezzanine slot)

System BIOS

BIOS Type
128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
Plug and Play (PnP)
APM 1.2
PCI 2.3
ACPI 1.0 / 2.0 / 3.0 / 4.0
BIOS rescue hot keys
USB Keyboard support
SMBIOS 2.7.1
UEFI 2.3.1

Management

Software
SuperDoctor® 5
Watch Dog
NMI
IPMI 1.5 / 2.0
Intel Node Manager
Power Configurations
ACPI / APM Power Management
Power-on mode for AC power recovery

PC Health Monitoring

Voltage
Monitors for CPU Cores, +1.8V, +12V, +3.3V, +5V, +12V Standby, +3.3V Standby, VBAT, Memory Voltages.
6+1 Phase-switching voltage regulator
FAN
6x 4-pin fan headers
6x fans with tachometer monitoring
Status monitor for speed control
Status monitor for on/off control
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 6x Fan Connectors
Thermal Monitor 2 (TM2) support
PECI
LED
CPU / System Overheat LED indicator
Suspend static indicator LED
UID/Remote UID
Other Features
Chassis intrusion detection
Chassis intrusion header
SDDC Support
RoHS
Dual cooling zones

Operating Environment

Operating Temperature Range
10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range
-40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
5% - 95% (non-condensing)

További specifikáció