Physical Stats

Form Factor
ATX
Dimensions
12" x 9.5 " (30.5cm x 24.0cm)

Processor/Cache

CPU
Single LGA775 (Prescott) ZIF Socket
Supports an Intel® Pentium® 4 processor 6x0 or 5x0 sequence on 90nm process ONLY (800MHz FSB) or
Supports an Intel® Celeron® processor with 256KB L2 Cache (533MHz FSB)
Hyper-Threading (HT) enabled
System Bus
800 / 533 MHz system bus
Operating System Software
Supports 64-bit Operating Systems
Supports 32-bit Operating Systems
OS Compatibility Chart

System Memory

Memory Capacity
Four 240-pin DIMM sockets
Supports up to 4 GB DDR2 400 / 533MHz unbuffered ECC or Non-ECC memory
Dual channel memory bus
Memory must be populated in pairs
Memory Type
DDR2 400 / 533MHz unbuffered ECC or Non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
256MB, 512MB, 1GB
Unbuffered ECC / non-ECC DDR2
Total 256MB to 4GB memory
Memory Voltage
1.8V only
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)

On-Board Devices

Chipset
Intel E7221 (Copper River) chipset
ICH6R + FWH + BCM5721
Serial ATA
Intel® ICH6R SATA controller
RAID 0, 1, JBOD support
SCSI
Adaptec AIC-7902 Controller
Dual-Channel Ultra320 SCSI (Host RAID only supports 4 drives)
Host RAID 0, 1, 10, JBOD support
RAID
Support for Zero-Channel RAID
Optional: (Card not included)
IPMI
Support for Intelligent Platform Management Interface v.2.0
(Optional: AOC-IPMI20-E) Card not included.
Network Controllers
2x Broadcom BCM5721 Gigabit Ethernet Controllers
Supports 10/100/1000BASE-T, RJ45 output
Graphics
Onboard integrated server quality graphics in MCH
Super I/O
Winbond 83627THF chip

Input / Output

Serial ATA
Four Serial ATA ports
Four SATA hard drives supported
IDE
One EIDE channel supports up to two UDMA IDE devices
Supports UDMA Mode 5, and ATA/100
Floppy
1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
Infrared
1x Infrared port header
LAN
2x RJ45 LAN port
USB
2x USB 2.0 / 1.1 ports
4x USB 2.0 / 1.1 header for 4x ports
VGA
1x VGA port
Keyboard / Mouse
PS/2 keyboard and mouse ports
Serial Ports
1x Fast UART 16550 serial ports
1x serial header
Parallel Port
1x ECP / EEP Parallel Port

Chassis ( Optimized for P8SC8 )
1U
SC813MS-300C
Important Note
To ensure system stability, a 300W (minimum) ATX power supply [4-pin +12V AND (20 or 24-pin)] is required.

Expansion Slots

PCI-Express
2 (x1) PCI-e slots
PCI-X
1x 64-bit 100MHz PCI-X (3.3V) slot
PCI
1x 32-bit 33MHz PCI (5V) slot

System BIOS

BIOS Type
8Mb Flash EEPROM with AwardBIOS®
BIOS Features
Plug and Play (PnP)
PCI 2.2
ACPI 1.0
USB Keyboard support

Management

Software
Optional IPMI (Intelligent Platform Management Interface) 2.0
SuperDoctor® III
Watch Dog
NMI
Power Configurations
ACPI/APM Power Management
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Keyboard Wakeup from Soft-Off
Power-on mode control for AC power loss recovery
Internal/External modem remote ring-on

PC Health Monitoring

Voltage
Monitors for CPU Cores, +1.8V, +3.3V, +5, ±12V, +5V Standby
CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
FAN
Total of five 3-pin fan headers
5x fans with tachometer monitoring
Status monitor with firmware / software speed control
Support 3-pin fans
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal control for 5x fan connectors
I2C temperature sensing logic
LED
CPU / System Overheat LED
+5V standby alert LED
Other Features
Chassis intrusion detection
Chassis intrusion header

OS Compatibility

• Please see our OS Compatibility Chart

További specifikáció